Others Setup; Setting The Room Equalizer Setup; Setting The Direct Mode Setup - Denon AVR-2807 Operating Instructions Manual

ENGLISH
Advanced Setup – Part 2

Others Setup

Setting the Room Equalizer Setup

Set the Room Equalizer setting with "All" or "Assign" for each
surround mode.
1
D D H H
Press to select "Room EQ Setup", then press
ENTER
.
2 F F G G
Press to set, then press
All:
Sets the equalizer for all surround modes.
Assign:
Sets the equalizer individually for each surround mode (
page 24).
3
When "All" is selected:
F F G G
Press to set.
OFF:
The equalizer is not used.
Audyssey:
Adjusts the frequency response of all speakers to correct the
effects of room acoustics.
Front:
Adjusts the frequency response of the surround speakers to
match the characteristics of the front channel speakers.
Flat:
Adjusts the frequency response of all speakers to the flattest
response. This mode is suitable for multi-channel music
surround sound sources.
Manual:
Selects the setting value that was set in the "Setting the
Manual Equalizer Setup" ( page 53, 54).
4
ENTER
Press .
1
ENTER
.
• The equalizer setting of "Audyssey", "Front" and "Flat" can be
selected after performing the Auto Setup.
• When the speaker set as "None" with the Auto Setup is
changed to on manually, the equalizer of "Audyssey", "Front"
and "Flat" cannot be used.
• When headphones are connected, the Room Equalizer cannot
be used.
2
3
60
ENGLISH
Advanced Setup – Part 2

Setting the Direct Mode Setup

Set the ON/OFF setting of Room Equalizer, in the case of the
surround mode is in "Direct" or "Pure Direct".
1 D D H H
Press to select "Direct Mode Setup", then
ENTER
press .
2
F F G G
Press to set.
ON, OFF:
Select "ON" to use the room equalizer, "OFF" if you do not
want to use it.
3
ENTER
Press .
1
2