Outputting A Program Source To Amplifier, Etc., In The Zone2 Room (Zone2 Select Mode); Remote Control Unit Operations During Multi-Source Playback - Denon AVR-2807 Operating Instructions Manual

Advanced Operation
<FUNCTION>
<ZONE2/REC SELECT>
[ZONE2 OFF]
[ZONE1 (MAIN) ON/OFF]
[ZONE2 ON]
[ZONE2]
[FUNCTION]
(ZONE2)
[CHANNEL]
[VOLUME]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Outputting a program source to amplifier,
etc., in the ZONE2 room
(ZONE2 SELECT mode)
1 < ZONE2/REC SELECT >
Press
"ZONE2 SOURCE" on the display.
• The " " indicator lights.
ZONE2 RECOUT
2
With "ZONE2 SOURCE" displayed, turn
< FUNCTION >
to select the source you want to
output appears on the display.
3
Start playing the source to be output.
For operating instructions, refer to the manuals of the
respective components.
• The signals of the source selected in the ZONE2 mode are also
output from the VCR-1, VCR-2 and CDR/TAPE recording output
terminals.
• Digital signals are not output from the ZONE2 audio output
terminals.
• About the MULTI ZONE connections (
41
ENGLISH
Remote control unit operations during multi-
source playback
1
[ZONE2]
Press
to display the
2 [ZONE2 ON]
Press
Press [ZONE2 OFF] to turn off the zone power.
3
Select the input source you wish to output.
When the function is set to TUNER, the preset channel can
be selected using [CHANNEL].
4
The volume of the outputs of the different zones
can be adjusted with
The ZONE2 volume can be adjusted only when "ZONE2" is
selected at "Power Amp Assign" in the "System Setup
Menu" ( page 54).
Default volume setting:
ZONE2 : –40 dB
The zone volume can be adjusted within the range of –70 to
18 dB.
page 40).
• When using ZONE2, it is possible to turn the power for the
MAIN ZONE (main zone) only on or off by pressing [ZONE1
(MAIN) ON/OFF].
ENGLISH
Advanced Operation
to select "ZONE2".
to turn on the zone power.
[VOLUME]
.