Denon av surround receiver operating instructions avr-2807 (88 pages)
Summary of Contents for Denon AVR-2802
Page 1
AV SURROUND RECEIVER AVR-2802 OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D’EMPLOI ISTRUZIONI PER L’USO AVR- 2802 PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER FUNCTION REMOTE SIGNAL SURROUND SENSOR BACK CH DIGITAL OUTPUT INPUT SIGNAL STAND BY AUTO DETECT SOURCE TUNING REC / 6.1 / 7.1...
Page 2
ENGLISH DEUTSCH FRANCAIS ITALIANO CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
We greatly appreciate your purchase of the AVR-2802. To be sure you take maximum advantage of all the features the AVR-2802 has to offer, read these instructions carefully and use the set properly. Be sure to keep this manual for future reference, should any questions or problems arise.
Surround, a new multi-channel format developed by Digital Theater Systems Inc. Connecting a turntable The AVR-2802 is also compatible with DTS Neo:6, a Connect the turntable’s output cord to the surround mode allowing 6.1-channel playback of AVR-2802’s PHONO jacks, the L (left) plug to the L jack, the R (right) plug to the right jack.
Page 5
Connecting video components • To connect the video signal, connect using a 75 /ohms video signal cable cord. Using an improper cable can result in a drop in video quality. • When making connections, also refer to the operating instructions of the other components. TV or DBS tuner Connecting a TV/DBS tuner AUDIO...
Page 6
(yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks. • The AVR-2802’s on-screen display signals are not output from the color difference (component) video output jacks (MONITOR OUT).
Page 7
Improve the ventilation condition around the unit and switch the power back If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit, switch off the power and contact a DENON service center. Note on speaker impedance •...
SETTING UP THE SYSTEM • Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 4 to 8), make the various settings described below on the monitor screen using the AVR-2802’s on-screen display function.
Page 10
• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor is connected to both the AVR-2802’s S-Video and video monitor output jacks and signals are input to the AVR-2802 from a video source (VDP, etc.) connected to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S- Video monitor output.
Page 11
Setting the Crossover Frequency and Subwoofer mode This screen is not displayed when not using a subwoofer. • Set the crossover frequency and subwoofer mode according to the speaker system being used. Select the “Crossover Frequency” mode. Select the Frequency. Select the “Subwoofer Mode”.
Page 12
ENTER The System Setup Menu reappears. The AVR-2802 automatically sets the optimum surround delay time for the listening room. NOTE: • If the distance unit is changed after the delay time is set, the settings are reset to the factory default values (see page 9).
Page 13
(stereo - 2 channel) and a digital audio recorder. • Do not connect the output of the component connected to the OPTICAL 3 OUT jack on the AVR-2802’s rear panel to any jack other than the OPTICAL 3 IN jack.
Page 14
At the System Setup Menu, press the SYSTEM SETUP button. SYSTEM SETUP The changed settings are entered and the on-screen display turns off. TITLE • On-screen display signals Signals input to the AVR-2802 On-screen display signal output VIDEO signal input S-video signal VIDEO MONITOR OUT video jack (yellow)
REMOTE CONTROL UNIT • The included remote control unit (RC-904) can be used to operate not only the AVR-2802 but other remote control compatible DENON components as well. In addition, the memory contains the control signals for other remote control units, so it can be used to operate non-Denon remote control compatible products.
Page 16
Preset codes set upon shipment from the factory. Preset memory (Video component) • DENON and other makes of components can be operated by setting the preset memory for your make of video component. Operation is not possible for some models, however. In this case use the learning function (see page 18) to store the remote control signals.
Page 17
Table 1: Combinations of Personal System Codes for Different Manufacturers “DVD” “VDP” DIRECT STEREO EXT.IN (DIRECT) (STEREO) (EXT. IN) q (DVD) DENON A DENON B — q (DVD) w (VDP) — — — w (VDP) e (TUNER) e (TUNER) —...
Page 18
ENGLISH Learning function • If your AV component is not a DENON product or it cannot be operated with the preset memory codesets, you can “teach” the AVR-2802’s remote control to “learn” the codes from the component’s original remote control.
Page 19
(3) Storing signals (4) Clearing system call settings RC-904 START LEARNED/TX SYSTEM CALL POWER CALL ON / SOURCE TUNER SHIFT TV/DBS PHONO VCR-1 CDR / TAPE CHANNEL VCR-2/V.AUX TV/VCR A / B VOLUME DISC SKIP+ DOLBY / DTS SPEAKER SURROUND DIRECT DSP SIMULATION 5CH / 6CH STEREO STEREO...
ENGLISH OPERATION Before operating Refer to “CONNECTIONS” (pages 4 to 8) and check that all connections are correct. Set the remote control unit’s slide switch to the AUDIO position. (only when operating with the remote control unit) AUDIO AVR/AVC VIDEO Turn on the power.
Page 21
Input mode display Select the play mode. • In the AUTO mode Press the SURROUND MODE button, then turn the SELECT knob. AUTO Example: Stereo • In the DIGITAL PCM mode SURROUND SELECT AUTO MODE STEREO • In the DIGITAL DTS mode AUTO (Main unit) (Remote control unit)
Page 22
ENGLISH After starting playback [1] Adjusting the sound quality (TONE) The tone control function will not work in the Direct mode. The tone switches as follows each time the TONE CONTROL button is pressed. TONE CONTROL BASS TREBLE (Main unit) With the name of the volume to SELECT be adjusted selected, turn the...
• The “MULTI” indicator and (Main unit) the indicator of the selected source light. • When the AVR-2802 is the REC OUT mode, the source MULTI cannot be output using the MULTI button...
ENGLISH SURROUND Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 12) or from the remote control unit, as described below.
Page 25
PARA. button to finish. NOTE: • There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO). The AVR-2802 sets the mode automatically according to the types of speakers set during the system setup process (page 10). Surround parameters q...
Page 26
ENGLISH Play a program source with the mark. • The Dolby Digital indicator lights DIGITAL when playing Dolby Digital sources. Light • The DTS indicator lights when playing DTS sources. Light The SIGNAL DETECT indicator lights • SIGNAL DETECT when playing DTS-ES/6.1-channel Light surround sources containing the identification signal.
DSP SURROUND SIMULATION • The AVR-2802 is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field. One of six preset surround modes can be selected according to the program source and the parameters can be adjusted according to the conditions in the listening room to achieve a more realistic, powerful sound.
Page 28
ENGLISH • Operating the surround mode and surround parameters from the main unit‘s panel. Turn the SELECT knob to select the surround mode. SELECT (Main unit) • When turned clockwise DIRECT STEREO DOLBY PRO LOGIC DTS NEO:6 5/6CH STEREO MATRIX VIDEO GAME JAZZ CLUB ROCK ARENA...
Page 29
Surround parameters e MODE: (DTS NEO:6) • Cinema This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources. This mode is effective for playing sources recorded in conventional surround formats as well, because the in-phase component is assigned mainly to the center channel (C) and the reversed phase component to the surround (SL, SR and SB channels).
ENGLISH LISTENING TO THE RADIO Auto tuning Set the input function to “TUNER”. FUNCTION TUNER (Main unit) (Remote control unit) Watching the display, press BAND the BAND button to select the desired band (AM or FM). (Remote control unit) Press the MODE button to MODE set the auto tuning mode.
Page 31
Recalling preset stations • To call out preset stations from the remote control unit. Watching the display, press SHIFT the SHIFT button to select the preset memory block. (Remote control unit) Watching the display, press the CHANNEL + or – button CHANNEL to select the desired preset channel.
Page 32
ENGLISH PTY search Use this function to find RDS stations broadcasting a designated program type (PTY). For a description of each program type, refer to “Program Type (PTY)”. Set the input function to “TUNER”. Set the slide switch to “AUDIO”. TUNER AUDIO AVR/AVC...
LAST FUNCTION MEMORY • This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the power is switched off. This function eliminates the need to perform complicated resettings when the power is switched on. •...
Change of positioning and acoustic image with 5.1-channel systems with 6.1-channel systems SL ch SL ch SR ch SB ch Movement of acoustic image from SR to SB to SL All the Denon original surround modes (see page 27) are SR ch...
Page 35
As seen from the side Surround The AVR-2802 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Dolby Surround (1) Dolby Digital (Dolby Surround AC-3) Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories.
Page 36
There are two types of DVD Dolby surround recording signals. q 2-channel PCM stereo signals w 2-channel Dolby Digital signals When either of these signals is input to the AVR-2802, the surround mode is automatically set to Dolby Pro Logic when the “DOLBY/DTS SURROUND” mode is selected.
Page 37
DTS-ES Extended Surround DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems Inc. While offering high compatibility with the conventional DTS Digital Surround format, DTS-ES Extended Surround greatly improves the 360-degree surround impression and space expression thanks to further expanded surround signals.
ENGLISH Surround modes and parameters Channel output SURROUND SUB- Mode Front L/R CENTER WOOFER DIRECT STEREO EXTERNAL INPUT DOLBY PRO LOGIC DTS NEO:6 DOLBY DIGITAL (6.1 SURROUND) DTS SURROUND (DTS ES MTRX 6.1) 5/6CH STEREO ROCK ARENA JAZZ CLUB VIDEO GAME MONO MOVIE MATRIX Signal...
Page 39
2 Agradecemos que haya comprado el equipo AVR-2802. 2 Para obtener el máximo rendimiento de todas las prestaciones que el AVR-2802 le ofrece, lea atentamente estas instrucciones y utilice el equipo de forma correcta. Conserve este manual para su consulta posterior, en caso de que surgieran dudas o problemas.
Page 40
(delantero izquierdo/derecho, central y Además de poder pasar de composite video a “S” surround izquierdo/derecho). Además, pueden video, el equipo AVR-2802 dispone de 2 conjuntos ajustarse varios parámetros en función del tipo de de entradas de aparatos de video (Y, P...
Page 41
Conexión de aparatos de video • Para conectar la señal de video utilice un cable de señal de video de 75 adecuado puede empeorar la calidad del video. • Al hacer las conexiones consulte también las instrucciones sobre los otros componentes. Conexión de un sintonizador de TV/DBS Sintonizador de TV o DBS TV/DBS...
Page 42
VIDEO (amarilla) y S-Video no son salidas de las tomas de video de diferencia de color (componente). • Las señales visualizadas en pantalla del AVR-2802, no son salidas procedentes de las tomas de salida de video (MONITOR OUT) de diferencia de color (componente).
Page 43
Si el circuito de protección se activara de nuevo aún cuando no detectara problemas en el cableado o en la ventilación del aparato, desconecte la alimentación eléctrica y póngase en contacto con el servicio técnico de DENON. Nota sobre la impedancia de los altavoces •...
Botón VIDEO SELECT ...(166) Botón DIMMER...(166) Botón STATUS...(166) Botón TONE DEFEAT ...(166) Botón SURROUND MODE ...(165) Botón SURROUND PARAMETER ...(169) Botón SELECT...(165) PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER AVR-2802 FUNCTION VOLUME LEVEL REMOTE SIGNAL SURROUND SENSOR BACK CH OUTPUT...
Page 45
AVR-2802. Transmisor de señal de mando Estos ajustes son necesarios para configurar el sistema AV para la sala de audición, donde el AVR-2802. a distancia ...(159) • Está situado en posición central: Botón de encendido...(164)
Page 46
Por ejemplo, si el monitor de TV está conectado a las tomas de salida de un monitor de video y a las de S-Video del AVR-2802 y se reciben señales en el AVR- 2802 procedentes de una fuente de video (VDP, etc) conectada a las tomas de entrada de video y de S- Video, las señales de visualización en pantalla son salidas prioritarias de la salida del monitor de S-Video.
Page 47
Ajuste de los modos de frecuencia de transición y subwoofer Esta pantalla no se visualiza cuando no se utiliza un subwoofer (altavoz de ultragraves). • Ajuste los modos de frecuencia de transición y de subwoofer de acuerdo con el sistema de altavoz que se esté utilizando.
Page 48
Introduzca el ajuste. Reaparece el menú de configuración del sistema. El AVR-2802 ajusta automáticamente el tiempo de demora óptimo del altavoz envolvente para la sala de audición. En el menú de configuración del sistema seleccione “Channel Level”...
Page 49
DIRECT, STEREO, 5/6 CH STEREO, DOLBY/DTS SURROUND, ROCK ARENA, JAZZ CLUB, VIDEO GAFE, MONO MOVIÓ, y MATRIZ. Ajuste la Asignación de la Entrada Digital • Este ajuste asigna las tomas de entrada digital del AVR-2802 a las distintas fuentes de entrada. Destello Ejemplo: Cuando el volumen se sitúa en –12 dB, mientras el tono...
Page 50
Este botón puede pulsarse en cualquier momento durante el proceso de configuración del sistema para terminar el proceso. SYSTEM SETUP TITLE • Señales visualizadas en pantalla Entrada de señales al AVR-2802 Toma de entrada de señales de video (amarilla) ( C : señal E : sin señal) NOTAS: •...
MANDO A DISTANCIA • El mando a distancia que se incluye (RC-904) puede utilizarse para activar las funciones no sólo del AVR-2802, sino también de otros aparatos DENON compatibles y que también se puedan accionar con mando a distancia. Además, la memoria contiene la señales de control para otras unidades de mando a distancia, entonces esta puede ser utilizada para operar productos compatibles de mando a distancia que no sean Denon.
Page 52
Memoria de preajuste (Componente de Audio) • Los componentes DENON pueden manejarse ajustando la memoria de preajuste para CDR o MD. No obstante, esta operación no es posible en algunos modelos. En este caso, utilice la función aprendizaje (véase la página 162) para memorizar las señales del mando a distancia.
Page 53
Tabla 1: Combinaciones de códigos personales de sistemas de varios fabricantes. “DVD” “VDP” DIRECT STEREO EXT.IN (DIRECT) (STEREO) (EXT. IN) q (DVD) DENON A DENON B — q (DVD) w (VDP) — — — w (VDP) e (TUNER) e (TUNER) —...
Page 54
Función aprendizaje • Si su aparato de AV no es un producto DENON o no puede accionarse con los códigos de memoria preestablecida, usted podrá “enseñar” al mando a distancia del AVR-2802 a “aprender” los códigos del mando a distancia del aparato de que se trate.
Page 55
(3) Memorización de señales (4) Borrado de los ajustes de llamada del sistema RC-904 START LEARNED/TX SYSTEM CALL POWER CALL ON / SOURCE TUNER SHIFT TV/DBS PHONO VCR-1 CDR / TAPE CHANNEL VCR-2/V.AUX TV/VCR A / B VOLUME DISC SKIP+ DOLBY / DTS SPEAKER SURROUND...
Page 56
PHONO CDR / TAPE CHANNEL TV/VCR A / B DISC SKIP+ DOLBY / DTS SURROUND DIRECT STEREO MASTER VOL. ANALOG EXT.IN TAPE CDR/MD MULTI MUTING VDP VCR SYSTEM SURROUND SETUP PARAMETER TITLE MENU/GUIDE CH SELECT ENTER SELECT AVR-2802 queda efecturar...
Page 57
Visualización del modo de entrada Seleccione el modo de reproducción. Pulsar el botón SURROUND MODE, y a • En el modo AUTO continuación girar el botón SELECT. AUTO Ejemplo: Estéreo • En el modo DIGITAL PCM SURROUND SELECT MODE STEREO AUTO •...
Page 58
Después de iniciar la reproducción [1] Ajuste de la calidad del sonido (TONE) La función de control del tono no funciona en el modo directo. El tono se activa de la siguiente forma cada vez que se pulsa el botón TONE CONTROL. TONE CONTROL BASS...
Page 59
• El indicador “MULTI” y el (Unidad principal) indicador de la luz del generador seleccionado. • Cuado el AVR-2802 está en el modo REC OUT, no puede MULTI haber emisión de la fuente utilizando el botón MULTI en la unidad de mando a distancia.
Page 60
SURROUND Antes de poner en marcha la función surround • Antes de poner en marcha la función surround, utilice los tonos de prueba para ajustar el nivel de reproducción de los distintos altavoces. Este ajuste puede hacerse con la configuración del sistema (véase la página 156) o con el mando a distancia, como se describe a continuación.
Page 61
NOTA: • Existen 4 modos Dolby Surround Pro Logic (NORMAL, PHANTOM, WIDE y 3 STEREO). El AVR-2802 ajusta el modo automáticamente de acuerdo con el tipo de altavoces ajustados durante el proceso de configuración del sistema. (página 154). Parámetros de sonido envolvente q Modo Pro Logic II: El modo Cinema se utiliza con programas de televisión en estéreo y con todos los programas codificados en...
Page 62
Reproduzca una fuente de programas con la marca • El indicador Dolby Digital se ilumina DIGITAL cuando se reproducen fuentes Dolby S’allume Digital. • El indicador DTS se ilumina cuando S’allume se reproducen fuentes DTS. • El indicador SIGNAL DETECT se SIGNAL DETECT ilumina...
Page 63
SIMULACIÓN SURROUND DSP • El AVR-2802 está equipado con un DSP (procesador de señales digitales) de gran calidad que procesa señales digitales para recrear sintéticamente el campo sonoro. Se puede seleccionar uno de siete modos surround preajustados, según la fuente de programas, y los parámetros pueden ajustarse de acuerdo con las condiciones existentes en la sala de audición, para obtener un sonido poderoso y más realista.
Page 64
• Cómo operar el modo surround y los parámetros surround desde el panel de la unidad principal. Girar el botón SELECT para seleccionar el modo surround. SELECT (Unidad principal) • Cuando se gira en el sentido de las agujas del reloj DIRECT STEREO DOLBY PRO LOGIC...
Page 65
• Para operar el control del tono desde la unidad principal. El tono se activa de la siguiente forma cada vez que se pulsa el botón TONE CONTROL. TONE CONTROL BASS TREBLE (Unidad principal) Una vez seleccionado el canal del volumen que se desea ajustar, girar el botón SELECT SELECT para ajustar el nivel.
Page 66
RECEPCIÓN DE RADIO Sintonización automática Ajuste la función de entrada a “TUNER“ FUNCTION TUNER (Unidad principal) (Mando a distancia) Observando el visualizador, BAND presione el botón BAND para seleccionar la banda deseada (AM o FM). (Mando a distancia) Presione el botón MODE MODE para ajustar el modo de sintonización automática.
Page 67
Sintonización de estaciones memorizadas • Para llamar las estaciones preajustadas desde la unidad de mando a distancia. SHIFT Observando el visualizador, presione el botón SHIFT para seleccionar el bloque de memoria preajustada. (Mando a distancia) Observando el visualizador, presione el botón CHANNEL CHANNEL + (UP) o –...
Page 68
Búsqueda PTY Use esta función para buscar las estaciones RDS que transmitan un tipo de programa designado (PTY). Para una descripción de cada tipo de programa, ver “Tipo de programa (PTY)“. Ajuste la función de entrada a “TUNER“. Ajuste interruptor deslizante a “AUDIO”.
Page 69
MEMORIA DE LA ÚLTIMA FUNCIÓN • Este equipo está equipado con una memoria de la última función ejecutada, que almacena las condiciones de ajuste de entradas y salidas tal como eran inmediatamente antes de que la alimentación eléctrica se cortara. Esta función elimina la necesidad de realizar reajustes complicados cuando la alimentación eléctrica se activa.
Page 70
6,1 canales sino también con fuentes convencionales de 2 a 5,1 canales. Todos los modos surround originales de Denon (consulte la página 171) son compatibles con la reproducción de 6.1 canales, de esta forma puede disfrutar de sonido de 6.1 canales con cualquier fuente de señal.
Page 71
Ejemplos de ajustes de altavoces Aquí describimos una serie de ajustes de altavoces para distintos objetivos. Use estos ejemplos como guía para configurar su propio sistema de acuerdo con el tipo de altavoces que se están utilizando y su finalidad principal. Sistema compatible DTS-ES (utilizando altavoces surround posteriores) (1) Ajustes básicos para ver películas Esto se recomienda principalmente al reproducir películas y al utilizar altavoces regulares de un camino...
Page 72
“bit stream“ y “convert to PCM“. Cuando se reproduzca una fuente en Dolby Digital surround en el AVR-2802, cambie el modo de salida del reproductor DVD a “bit stream“. En algunos casos, los reproductores están equipados con ambas salidas digitales “bit stream + PCM“ y “PCM solamente“.
Page 73
DTS-ES Extended Surround ™ DTS-ES Extended Surround es un nuevo formato de señales digitales multicanal desarrollado por Digital Theater Systems Inc. Al mismo tiempo que ofrece una alta compatibilidad con el formato DTS Digital Surround convencional, DTS-ES Extended Surround mejora significativamente la impresión de sonido envolvente de 360 grados y la expresión de espacio gracias a la expansión de las señales de sonido envolvente.
Page 74
Modos y parámetros surround Salida de canal SURROUND SUB- Mode Front L/R CENTER WOOFER DIRECT STEREO EXTERNAL INPUT DOLBY PRO LOGIC DTS NEO:6 DOLBY DIGITAL (6.1 SURROUND) DTS SURROUND (DTS ES MTRX 6.1) 5/6CH STEREO ROCK ARENA JAZZ CLUB VIDEO GAME MONO MOVIE MATRIX Señal...