Connecting The Trigger Out Jacks; Connecting The Multi Zone Terminals; Zone2 Out Connections; Zone2 Speaker Out Connections - Denon AVR-2807 Operating Instructions Manual

Connecting Other Sources

Connecting the TRIGGER OUT jacks

Connecting the MULTI ZONE terminals

For instructions on operations using the MULTI ZONE functions (

ZONE2 out connections

• If another pre-main (integrated) amplifier is connected, the ZONE2 out (fixed level) terminals can
be used to play a different program source in ZONE2 the same time (
Extension terminal
for future use.
• For the AUDIO output, use high quality pin-plug cables and wire in such a way that there is no
humming or noise.
• For instructions on installation and operation of separately sold devices, refer to the devices'
operating instructions.
Turn the DC 12 V voltage on and off for
the individual functions and surround
modes.
For details, see "Setting the Trigger Out"
( page 55).
page 40, 41).
page 40).
Input Output
+ +
AUX OUT
Infrared retransmitter Infrared
sensor
Monitor
(ZONE2)
G
S-VIDEO
IN
F
VIDEO
IN
Premain amplifier
(ZONE2)
A
L
L L
IN
R R
R
ENGLISH

ZONE2 speaker out connections

• When the surround back's power amplifier is assigned to the ZONE2 output channel at "Power
Amp Assign" in the "System Setup Menu", the surround back speaker terminals can be used
as the ZONE2 speaker out terminals (
• The connections diagram below is an example for when the surround back speaker is assigned
to the ZONE2 stereo 2 channel.
In this case, surround back speaker out can not be used for MAIN ZONE.
Subwoofer Center speaker
Connection
terminal for
subwoofer
with built-in
amplifier.
> <
IN
( L ) ( R )
> < > <
Surround speaker
21
Connecting Other Sources
page 54).
Front speaker Front speaker
(A) (B)
( L ) ( R ) ( L )
> < > < > < >
( L ) ( R )
> < > <
ZONE2 Front speaker
ZONE2
ENGLISH
( R )
<