Selecting The Room Equalizer Mode; Turning The Sound Off Temporarily (Muting); Listening Over Headphones; Switching The Front Speakers - Denon AVR-2807 Operating Instructions Manual

ENGLISH
Basic Operation
<STATUS>
PURE DIRECT <DIMMER>
DIRECT/STEREO
<PHONES> SURROUND
PARAMETER
ROOM EQ
[ON SCREEN]
[SPEAKER]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Selecting the room equalizer mode

ROOM EQ
The room equalizer function offers 3 correction curves:
"Audyssey", "Front" and "Flat". These modes can be selected
after performing the auto setup procedure.
ROOM EQ
Press
OFF
• The "MultEQ XT" indicator lights green when "Audyssey" is
selected, red when "Front" or "Flat" is selected.
The indicator lights red if the speaker settings are changed
after the auto setup measurements have been made (
page 56 ~ 59).
Audyssey, Front, Flat:
See page 60.
Manual:
Selects the setting value that was set in the Manual Equalizer
Setup ( page 53, 54).

Turning the sound off temporarily (MUTING)

[MUTING]
Press
DIRECT/STEREO You can adjust the muting level (
PURE DIRECT
[MUTING]
• Canceling MUTING mode:
SURROUND
To cancel the muting mode, either press [MUTING] or adjust the
PARAMETER
volume.

Listening over headphones

Connect the headphones to
• No sound is produced from the speakers automatically.
NOTE:
• To prevent hearing loss, be careful not to raise the volume
level excessively when using headphones.
.
Audyssey Front Flat Manual
.
page 55).
< PHONES >
.
24
ENGLISH

Switching the front speakers

[SPEAKER]
Press .
FRONT A FRONT B
FRONT A+B
Checking the currently playing program
source, etc.
2 On screen display
[ON SCREEN]
Press .
• The current program source and various settings are
displayed on the monitor screen.
2 Front panel display
< STATUS >
Press .
• The current program source and various settings are indicated
on the display.

Switching the brightness of the display

< DIMMER >
Press .
The brightness of the display can be adjusted in 3 steps. The
display can also be turned off.
Basic Operation