Setting The Digital In Assignment; After Setting Up System - Denon AVR-1404 Operating Instructions Manual

ENGLISH

Setting the Digital In assignment

Input the type of components connected to the digital input terminals.
1
2
NOTE:
• TUNER cannot be selected.
After setting up the system
1
This completes the system setup operations. Once the system is set up, there is no need to make the settings again unless other components
or speakers are connected to or the speaker layout is changed.
20
Use the (left) and (right) buttons to assign the input function connected to the COAXIAL input (COAXIAL)
terminal.
• Select "OFF" if nothing is connected.
Press the ENTER or (down) button to switch the optical input (OPT) setting.
Use the (left) and (right) buttons to assign the input function connected to the OPTICAL input (OPTICAL)
terminal.
• Select "OFF" if nothing is connected.
Press the ENTER or (down) button if you want to start the settings over from the beginning.
Press the SYSTEM SETUP button to finish system set up.
(Initial)
(left) button (right) button
(Initial)
(left) button (right) button