Denon AVR-1404 Operating Instructions Manual page 38

ENGLISH
DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1 Select the surround mode for the input channel.
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
MATRIX
2
(Remote control unit)
3
(Remote control unit)
(1) ROOM SIZE
(Remote control unit)
(2) EFFECT LEVEL
(Remote control unit)
38
(Remote control unit)
MONO MOVIE ROCK ARENA
VIDEO GAME JAZZ CLUB
To enter the surround parameter setting mode, press the SURROUND PARAMETER button.
• The surround parameter switches in the following order each time the SURROUND PARAMETER button is
pressed for the different surround modes.
• ROCK ARENA
• JAZZ CLUB
• VIDEO GAME
• MONO MOVIE
Display the parameter you want to adjust, then use the
Use the (left) and
Use the (left) and
• MATRIX
ROOM SIZE DELAY
EFFECT DEFAULT
DEFAULT
(right) buttons to set the room size.
(right) buttons to set the effect level.
1
2
3 3
• VIRTUAL
EFFECT LEVEL
DEFAULT
(left) and (right) buttons to set it.
(Initial)
(left) button (right) button
(Initial)
(left) button (right) button