Denon AVR-1404 Operating Instructions Manual page 29

[2] Listening over headphones
1 Connect the headphones to the
PHONES jack of the front panel.
2 Press the SPEAKER A or B button turn
the speaker off.
Caution: No sound is produced from the headphones when
speakers A or B are turned on.
[3] Turning the sound off temporarily (muting)
1 Use this to turn off the audio output
temporarily.
Press the MUTING button.
Cancelling MUTING mode.
• Press the MUTING button again.
• Muting will also be cancelled when MASTER VOL is
adjusted up or down.
[4] Combining the currently playing sound with the desired image
1 Simulcast playback
Use this switch to monitor a
video source other than the
audio source.
Press the VIDEO SELECT
button repeatedly until the
desired source appears on
the display.
Cancelling simulcast playback.
• Select "SOURCE" using the video select button.
• Switch the program source to the component
connected to the video input jacks.
[5] Checking the currently playing program source, etc.
1 Front panel display
• Descriptions of the unit's
operations are also
displayed on the front
panel display. In addition,
the display can be
switched to check the
unit's operating status while playing a source by pressing
the STATUS button.
2 Using the dimmer function
• Use this to change the
brightness of the display.
The display brightness
changes in four steps
(bright, medium, dim and
off) by pressing the main
unit's DIMMER button repeatedly.
BRIGHT
PHONES
1
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
MEDIUM DIM
OFF
NOTE:
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
2
1
1
2
ENGLISH
1
1
2 1
29