Denon AVR-1404 Operating Instructions Manual page 35

Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1 Select the input source.
Playback with a digital input
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 20).
Example: DVD
(Main unit)
w Set the input mode to "AUTO" or DTS.
(Main unit)
2 Select the Dolby/DTS Surround mode.
(Main unit)
3
Play a program source with the
• The Dolby Digital indicator lights when
DIGITAL
playing Dolby Digital sources.
Light
• The DTS indicator lights when playing
Light
DTS sources.
4
Set the surround parameter according to the source.
First, press the SURROUND PARAMETER button.
(Remote control unit)
NOTE:
Please make sure the "AUDIO" position of the slide switch
on the remote control unit.
5
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
, mark.
Use the (left) and (right) buttons to set the CINEMA EQ.
Press the SURROUND PARAMETER or
1 1 3
2
2
1
5, 6, 7, 8
1
(left) button
(down) button to switch to the D. COMP. setting.
ENGLISH
4, 5, 6, 7, 8
5, 6, 7, 8
5, 6, 7, 8
(Initial)
(right) button
35