(3) DELAY TIME
(Remote control unit)
(4) D. COMP.
(Remote control unit)
(5) LFE
(Remote control unit)
(6) DEFAULT
(Remote control unit)
Press the surround parameter button to switch to the ROOM SIZE, DELAY, EFFECT LEVEL setting.
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the
setting will be completed.
Use the
(left) and
(right) buttons to set the delay time.
Use the
(left) and
(right) buttons to set the D. COMP.
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
Use the
(left) and
(right) buttons to set the LFE.
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
To reset the settings to the factory defaults, use the
(Initial)
(left) button
(right) button
(Initial)
(left) button
(right) button
(Initial)
(left) button
(right) button
(left) and
(right) buttons to display "Yes".
(left) button
(right) button
ENGLISH
39