Connecting The Antenna Terminals - Denon 1083 Operating Instructions Manual

Connecting the antenna terminals

DIRECTION OF
BROADCASTING
STATION
75 /ohms
COAXIAL
CABLE
FM INDOOR
ANTENNA
(Supplied)
• An F-type FM antenna cable plug can be connected directly.
AM loop antenna assembly
1 2
Remove the vinyl tie
and take out the
connection line.
4
a. With the antenna
on top any stable
surface.
Mount
b. With the antenna
attached to a wall.
Installation hole
Mount on wall, etc.
10
FM ANTENNA
GROUND
Connect to the AM
antenna terminals.
3
Bend in the reverse
direction.
AM LOOP
ANTENNA
(Supplied)
AM OUTDOOR
ANTENNA
Connection of AM antennas
1. Push the lever. 2. Insert the conductor.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC which provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry
as practical.
Notes:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect
the AM loop antenna.
• Make sure AM loop antenna lead terminals do not touch
metal parts of the panel.
3. Return the lever.