Tone Control Setting - Denon 1083 Operating Instructions Manual

Tone control setting

• Use the tone control setting to adjust the bass and treble as desired.
• To operate the tone control from the remote control unit.
1
(Remote control unit)
2
(Remote control unit)
3
(Remote control unit)
4
(Remote control unit)
5
(Remote control unit)
6
(Remote control unit)
Display the surround parameter
screen on the monitor.
The screen for the selected
surround mode appears.
"TONE" cannot be selected
in the Direct mode.
Select "TONE".
Switch to the Tone Control
screen.
Select Tone Defeat OFF.
To select Bass or Treble.
Enter the setting.
The surround menu screen re-appears.
To end the setting mode, press the surround parameter button again.
To set the level.
(Remote control unit)
1, 6
2, 3, 4
5
65