Disconnecting The Mower From The Tractor - Alamo none Operator's Manual

Alamo industrial flail mower operator's manual

Table of Contents

13. DISCONNECTING THE MOWER FROM THE TRACTOR

Always shut the Tractor completely down, place the transmission in park, and set the

parking brake before you or anyone else attempts to connect or disconnect the Implement

and Tractor hitches.

To disconnect the rear mower, first extend the

tractor 3-point hitch top link to remove tension on

the top link hitch pin. When the pin is loose and

easy to rotate, remove the pin from the mower.

Next remove both lower hitch pins. OPS-F-0055

After disconnecting the 3 lift points, remove the

mower driveline from the tractor PTO shaft. Lay

the driveline down carefully to avoid damaging the

driveline or its shield. Do not let the driveline fall

into mud or dirt, which can contaminate the

bearing and shorten the life of the driveline.

OPS-F-0056

Before disconnecting the mower, the PTO must be disengaged and all motion at a complete stop. Move the

mower to a level storage location and lower both wings to the ground. If the mower will be stored with the

sections in the raised position, be sure that the locks are engaged. If the mower is not resting securely on the

ground, block the mower up securely before attempting to disconnect it from the tractor. Use extreme care to

keep feet and hands from under the mower and clear of any pinch points.

GRASS KING 03/09

OPERATION

(S3PT-15)

Operation Section 4-36

Table of Contents