Shutting Down The Implement; Disconnecting The Mower From The Tractor - Alamo Interstater 803213C Operator's Manual

OPERATION

11.6 Shutting Down the Implement

To shut down the implement, first bring the tractor
to a complete stop. Then slow down the implement
by reducing the engine speed before disengaging
the PTO. Wait for all motion to stop before
proceeding to drive or shut down the tractor.
Park the tractor on a level surface, place the
transmission in park or neutral and apply the
parking brake, lower the attached implement to the
ground, shut down the engine, remove the key, and
wait for all motion to come to a complete stop
before exiting the tractor. OPS-F- 0011

12. DISCONNECTING THE MOWER FROM THE TRACTOR

Before disconnecting the mower, the PTO must be
disengaged and all motion at a complete stop.
Move the mower to a level storage location and
lower both wings to the ground. If the mower will
be stored with the sections in the raised position,
be sure that the locks are engaged. If the mower
is not resting securely on the ground, block the
mower up securely before attempting to
disconnect it from the tractor. Use extreme care to
keep feet and hands from under the mower and
clear of any pinch points. OPS-F-0012
INTERSTATER 03/09 Operation Section 4-34
© 2009 Alamo Group Inc.