Spindle Service Procedure - Alamo none Operator's Manual

Be certain
prevent injuries to hands and feet due to inadvertent dropping or falling over.
Always wear safety glasses and gloves to prevent eye and hand injury when chiseling or
hammering on metal components. Hardened metal will chip un-acceptedly.
An assembled spindle housing is quite heavy. Use a hoist or get help to handle them safely.
Lift carefully and properly using your legs to lift - NOT YOUR BACK.

SPINDLE SERVICE PROCEDURE

02960553B and 02960553C
1. Remove blade or pan.
2. Remove hydraulic motor.
3. Remove spindle assembly from mower deck.
4. Drain remaining lubricant from housing.
GRASS KING 03/09
© 2009 Alamo Group Inc.
MAINTENANCE
to clamp or securely support the Spindle Housing and sub-assemblies to
Maintenance Section 5-17