Standard Equipment And Specifications - Alamo none Operator's Manual

1. Standard Equipment and Specifications

Cutting Width
Cutting Capacity (Diameter)
Cutting Height Range
Cutting Housing
Cutter Shaft
Cutter Shaft Bearings
Rear Roller
Weight (Approximate)
Knife Pairs
Replaceable Skid Shoes
Tractor HP Requirements
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower's rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
GRASS KING 03/09
© 2009 Alamo Group Inc.
OPERATION
62" or 74"
1" maximum
1/2" to 6"
10-Gauge Top and 5-16" End-Plates with Bearing Guards
4-1/2" Diameter, 3/8" Wall
1-15/16" Bore greasable,sealed,self aligning
6" diameter, 1/4" wall, full length tube rated at 6,000 lbs.
62"-1720 lbs., 74"-1870 lbs.
62" - 36 Coarse Cut, 76 Fine Cut
74" - 36 Coarse Cut, 92 Fine Cut
Standard
Minimum 50-90 HP
Operation Section 4-3
(SGM-14)