Speech Command System - Toyota LAND CRUISER Owner's Manual

OTHER FUNCTIONS

Speech command system

The speech command system allows you
to operate the navigation system without
your hands off the steering wheel.
UNL301
1. Push the speech command switch.
A beep sounds and on screen message is
displayed with an indicator at the top left.
126
2. Give a command while an indicator is
shown in the display. If you want to check
the command list, touch the
switch to display the Help screen. (See
"Help screen" on page 127.) When you
"Cancel"
touch the , the previous screen
returns.
If the navigation system does not respond or
the confirmation screen does not disappear,
please push the speech command switch
and try again.
If no command is given, a beep sounds and
the indicator disappears 6 seconds later.
If the system does not recognize your
speech, the system will respond with this
message ("System does not recognize this
command, please rephrase your com-
mand."). Start the operation from the begin-
ning.
UNL303
D Microphone
"Help"
It is unnecessary to speak directly into the
microphone when giving a command.