Map Scale - Toyota LAND CRUISER Owner's Manual

BASIC FUNCTIONS
If there is already a set destination, the
to " "Replace
switch and the
switch are displayed.
When there is already a preset destination,
"Add to "
using the switch to set an addi-
tional destination, will set the new one as the
first point of arrival.
To edit a memory point, touch the
switch. (For details, see page 68.)
8
"Add

Map scale

"
"Edit"
Touch the or
the scale of the map display. The scale bar
and indicator at the bottom of the screen indi-
cates the map scale menu. The scale ranges
150 feet (50 m) to 250 miles (400 km).
Touch the or
scale bar changes normally. If you continue
to touch on the switch, the scale bar changes
smoothly.
You can change the scale of the map display
by touching the scale bar directly. It is not
available during driving.
The map scale is displayed under the north-
up symbol or heading-up symbol at the top
left of the screen.
When the map scale is at the maximum
range of 250 miles (400 km),
shown. When the map scale is at the
minimum range of 150 feet (50 m),
is not shown. However, in the area
where the foot print map is contained,
when the map scale is changed to 150
feet (50 m), the
the switch.
switch to change
switch until the
INFORMATION
is not
switch changes to