Toyota LAND CRUISER Owner's Manual page 157

If a tape side rewinds completely, the cas-
sette player will stop and then play that
same side. If a tape fast forwards com-
pletely, the cassette player will play the
other side of the tape, using the auto- re-
verse feature.
Compact Disc Player
If you want to fast forward or reverse
through a compact disc track, push and
hold in the fast forward or reverse button.
When you release the button, the compact
disc player will resume playing.
AM button
Push "AM" to turn on the radio and select
the AM band. "AM" will appear on the
display.
If the audio system is off, you can turn
on the radio by pushing "AM". Also, push
"AM" to switch from cassette or compact
disc operation to radio operation.
AUDIO- TUNE Knob
This knob is used to adjust the tone and
balance or to tune the station manually on
the radio mode.
Tone and sound balance adjustment func-
tion—
Each time you push the "AUDIO- TUNE"
knob, the display changes as in the fol-
lowing. To adjust the tone and balance or
turn on or off the automatic sound leveliz-
er, turn the knob.
BAS: Adjusts low- pitched tones.
MID: Adjusts mid- pitched tones.
TRE: Adjusts high- pitched tones.
BAL: Adjusts the sound balance between
the right and left speakers.
FAD: Adjusts the sound balance between
the front and rear speakers.
Manual tuning function—
Turn the knob. The radio will step up or
down to another frequency.
2004 L/C100 from Aug '03 Prod. (OM60A04U)
DISC (Compact Disc) button
Push "DISC" to switch from radio or cas-
sette operation to compact disc operation.
If the audio system is off, you can turn
on the compact disc player by pushing
"DISC". In both cases, a disc must alrea-
dy be loaded in the player.
When the audio is set into compact disc
operation, the display shows the track or,
track and disc number currently being
played.
If the player or another unit equipped with
the player malfunctions, your audio system
will display one of the three following er-
ror messages.
If "WAIT" appears on the display, it indi-
cates that the inside of the player unit
may be too hot due to the very high ambi-
ent temperature. Remove the disc from
the player and allow the player to cool
down.
If "ERROR 1" appears on the display,
it indicates the disc is dirty, damaged or
label face down. Clean the disc or insert
it correctly.
If "ERROR 3" or "ERROR 4" appears
on the display, it indicates there is a
trouble inside the system. Eject the disc.
Set the disc again.
157