HP P4522A - Traffic Management Server Sa8220 User Manual page 63
Hp traffic director server appliances sa7200/sa7220 and 8200/sa8220 - user guide
Hide thumbs
Also See for P4522A - Traffic Management Server Sa8220:
- Warranty and support information (12 pages) ,
- Getting started manual (23 pages)
Table of Contents
Advertisement
C H A P T E R 3
failover
gateway
help
Specifies the SA8220's failover method. Three failover options are
available:
• disabled: no failover method will be used
• serial: serial cable failover will be used
• route: router failover will be used
Example:
failover
monitor>
Specify failover method (disabled, serial,
route): [disabled] --->serial
Checking for failover unit...
Failover unit not detected or may not be
configured.
Is this machine Primary or Backup?
[Primary] --->
Enter the Network side Online IP Address
10.6.3.200
--->
Enter the Server side Online Address
10.6.5.200
--->
Enter the Network side Online hostname
--->net-onlinehost
Enter the Server side Online hostname
--->serv-onlinehost
Serial failover successfully configured
Specifies the default gateway.
Example:
monitor>gateway
Enter default gateway: --->10.6.3.1
Lists all Boot Monitor commands or optionally displays syntax for a
specified command.
Example:
gateway
interface
Using the Boot Monitor CLI
Set default gateway
Configure network interface card
51
Advertisement
Table of Contents
Troubleshooting
