HP P4522A - Traffic Management Server Sa8220 User Manual page 228
Hp traffic director server appliances sa7200/sa7220 and 8200/sa8220 - user guide
Hide thumbs
Also See for P4522A - Traffic Management Server Sa8220:
- Warranty and support information (12 pages) ,
- Getting started manual (23 pages)
Table of Contents
Advertisement
C H A P T E R 6
216
HP Traffic Director Server Appliances User Guide
2. To move the prompt to the level of the specific service, type this
command:
HP SA8220/config/policygroup/saptest#service sap
Add Servers to the SAP Service
1. To add the server "serv1" to the SAP service, type this command:
HP SA8220/config/policygroup/saptest/service/
sap#server create serv1.prime.com port 80
Server serv1.prime.com port 80 has been created.
This tells the SA8220 that serv1.prime.com can fulfill requests
arriving at 30.1.1.201 on port 80.
2. Move the prompt again by typing this command:
HP SA8220/config/policygroup/saptest/service/
sap#server serv1.prime.com port 80
3. To finish, type this command:
HP SA8220/config/policygroup/saptest/service/
sap/server/serv1.prime.com/port/80#mode sap
The
command allows clients' addresses to be
mode sap
forwarded to the server in place of the SA8220's address.
Advertisement
Table of Contents
Troubleshooting
