HP P4522A - Traffic Management Server Sa8220 User Manual page 181

C H A P T E R 5
Command
config policygroup
service server create
NOTE: The server name
and port must be unique.
config policygroup
service server port 606
config policygroup
service server delete
Description
Creates a new server.
config policygroup <policy-name> service
<service-name> server create <server-name>
where:
• policy-name is the name of an existing Policy Group
• service-name is the name of the service
• server-name is any valid server name
Enables or disables 606 error detection on the named server. 606 is
a user-defined error code. When 606 error detection is enabled,
requests that generate 606 errors are rerouted (transparently to the
client), to the next available server. When disabled, the error is sent
back to the requesting client.
config policygroup <policy-name> service
<service-name> server <server-name> port <port>
606 [enable | disable]
where:
• policy-name is the name of an existing Policy Group
• service-name is the name of the service
• server-name is the name of the server
• port is the server port
• enable enables 606 error detection
• disable disables 606 error detection
Deletes an existing server.
config policygroup <policy-name> service
<service-name> server delete <server-name>
where:
• policy-name is the name of an existing Policy Group
• service-name is the name of the service
• name is the name of the server to be deleted
Policy Group Commands
169