HP P4522A - Traffic Management Server Sa8220 User Manual page 46

C H A P T E R 2
NOTE: The Online IP
Address is the address
used by the SA8220 that is
currently accepting
remote administration
connections — this can be
either the Primary or the
Backup SA8220 (though
it is typically the
Primary). The Online IP
Address is the address by
which you can access the
Online SA8220 using
telnet for administration.
34
HP Traffic Director Server Appliances User Guide
4. Follow the prompts as illustrated below (for single NIC
operation):
Specify failover method (disabled, serial,
route) :[disabled]--->serial
Checking for failover unit...
Failover unit not detected or may not be
configured.
Is this machine Primary or Backup? [Primary]--->
Enter the Network's ONline IP Address
--->10.6.3.200
Enter the Network's Online hostname
--->netonline
Serial failover successfully configured
If Dual NIC operation is enabled, failover configuration looks
like the example shown below:
monitor>failover
Specify failover method (disabled, serial,
route) [disabled] --->serial
Checking for failover unit...
Failover unit not detected or may not be
configured.
Is this machine Primary or Backup? [Primary]
--->primary
Enter the Network side Online IP Address
[10.6.3.200]--->
Enter the Server side Online IP Address
[10.6.4.200] --->
Enter the Network side Online hostname
[netonline] --->
Enter the Server side Online hostname --->
servonline
Serial failover successfully configured