HP P4522A - Traffic Management Server Sa8220 User Manual page 114

C H A P T E R 4
102
HP Traffic Director Server Appliances User Guide
• System Contact: corresponds to the MIB variable sysContact in
MIB-II. System Contact (sysContact) is the name of the
administrator of this SA8220. By default, sysContact is NULL.
• System Name: corresponds to the MIB variable sysName in
MIB-II. System Name (sysName) is the name of this SA8220.
By default, sysName is the hostname of the SA8220.
The Community Strings box contains community strings accepted by
the SA8220 on incoming SNMP requests. Up to ten community
strings can be configured for use by the SA8220. Each community
string can have read-only (ro) or read-write (rw) privilege, and can be
configured for use by a specific IP address or all IP addresses. When
the value "any" is used for <ip address>, the community string can be
used by all IP addresses.
For example, the string:
community=test ip=209.218.240.5 rights=ro
creates the community string test with read-only privilege. SNMP
read-only requests using community string test are accepted only
from IP address 209.218.240.5.
By default, the following community strings are defined:
public ro "any"
private rw "any"
The Trap Receivers box contains the IP addresses to which the
SA8220 will send traps. The SA8220 SNMP can send trap
notifications to up to ten configured trap receivers. Each IP address
configured as a trap receiver is associated with a community string,
which is included in traps sent to that IP address.