C H A P T E R 5
Command
config sys security
custom telnet
config sys security info
config sys security
mode
Description
Enables or disables administration using telnet.
config sys security custom telnet [enable |
disable]
Disabled by default.
Displays the current state of the security system
Specifies the security mode. The default mode is "closed."
config sys security mode [open | closed |
custom]
where mode is one of the following:
•
open permits all administration tasks to be performed without
restriction from all IP addresses and enables IP forwarding. IP
forwarding allows direct access to servers at their real IP
addresses.
•
closed allows administration to be performed only from the
serial port.
•
custom enables the configuration displayed by config sys
security custom info . Within config sys
security custom each SA8220 administration access
method can be configured individually.
Security Commands
181