HP P4522A - Traffic Management Server Sa8220 User Manual page 184

C H A P T E R 5
Command
config policygroup
service server port http
config policygroup
service server port
mode
NOTE: OPR requires the
use of servers' loopback
adapters. For more details,
please see "Configuring
Out-of-Path Return" in
Appendix D.
172
HP Traffic Director Server Appliances User Guide
Description
Enables or disables HTTP error detection on the named server.
When HTTP error detection is enabled, requests that generate
HTTP errors 401-405 and 500-503 are rerouted (transparently to
the client), to the next available server. When disabled, these errors
are sent back to the requesting client.
config policygroup <policy-name> service
<service-name> server <server-name> port <port>
http [enable | disable]
where:
• policy-name is the name of an existing Policy Group
• service-name is the name of the service
• server-name is the name of the server
• port is the server port
• enable enables HTTP error detection
• disable disables HTTP error detection
Enables or disables Source Address Preservation (SAP) on the
named server. When OPR is enabled, the CLI-configured server
port is ignored and the configured server service port is used. By
default, SAP is enabled (and cannot be disabled) when OPR is
enabled.
config policygroup <policy-name> service
<service-name> server <server-name> port <port>
mode [brokered] | opr | sap
where:
• policy-name is the name of an existing Policy Group
• service-name is the name of the service
• server-name is the name of the server
• port is the server port
• brokered is the default mode, with both SAP and OPR
disabled. opr enables Out-of-Path Return
• sap enables Source Address Preservation