LaCie 2big Network
User Manual
5.3.2. Initializing the New Drive
■
When a new drive has been correctly installed into
the 2big you will need to initialize the drive before the
2big can use it.
To initialize a new drive:
1.
Sign in to the NAS administration page administra-
tor account.
2.
Click on
System > Disk >
3.
Select the "Apply modifications" box and click the
button (Fig. 5.3.2).
Apply
TeChNICAl NOTe:
new disk has to be synchronized with the original one.
Depending on the capacity of the disk, synchronization
may take a few hours.
RAID.
If the 2big is in SAFE mode, the
Figure 5.3.2
raId
page