LaCie 2big Network
User Manual
2.5. Configuring the 2big Network on a LAN Without a DHCP Server
In the case that your server is not DHCP-enabled,
you will need to manually assign the correct network
settings for your LaCie 2big Network.
2.5.1. Configure with LaCie Ethernet Agent (Windows)
■
The easiest way to modify your LaCie 2big Net-
work's network configuration on a PC is to use the
LaCie Ethernet Agent. See section
with LaCie Ethernet Agent
ing the network configuration software.
1.
Start LaCie Ethernet Agent (see section
necting with LaCie Ethernet
2.
Click on the Ethernet Agent icon in the system
tray and select
2.5.1-A). The Ethernet Agent Configuration win-
dow (Fig. 2.5.1-B) opens.
3.
Uncheck the "DHCP" box.
4.
Modify the network settings to work with your net-
work.
5.
Click Apply.
2.3, Connecting
for information on install-
Agent).
Advanced > Configuration
2.3, Con-
(Fig.
Fig. 2.5.1-a
Fig. 2.5.1-B
Setup
page 0