LaCie 2big Network
User Manual
2.2. Connecting the Ethernet Cable
Unlike regular desktop hard drives, the 2big Net-
work is only accessible when attached to your network
and does not connect directly to your computer.
To connect the Ethernet cable:
1.
Turn the drive on. See
2.
Connect the Ethernet cable to the Ethernet port on
the back of the LaCie 2big Network (Fig. 2.2-A).
3.
Connect the other end of the Ethernet cable into an
available Ethernet port on your router (Fig. 2.2-B).
Allow a few moments for your network to recognize
the drive.
Now move on to step 3,
Ethernet Agent (Windows)
Configurator Wizard (Mac)
2.1, Turning the Drive
On.
Connecting with LaCie
or
Connecting with the IP
.
safe 100
off auto on
Fig. 2.2-a
Fig. 2.2-B
Setup
page
big
To 2big Network