Note: CE Compliance of this product is valid
only if powered with the correct HP-provided and
CE marked AC adapter.
Compliance with these directives implies
conformity to applicable harmonized European
standards (European Norms) which are listed on
the EU Declaration of Conformity issued by
Hewlett-Packard for this product or product
family.
This compliance is indicated by the following
conformity marking placed on the product:
This marking is valid for non-
Telecom products and EU
harmonized Telecom
products (e.g. Bluetooth).
Hewlett-Packard GmbH, HQ-TRE, Herrenberger
Strasse 140, 71034 Boeblingen, Germany
Geprüfte Sicherheit (Proven
Safety)
Not intended to be used at VDU workplaces.
Japanese Notice
Power Cord Statement for
Japan
Additional Safety Information
This product has not been evaluated for
connection to an "IT" power system (an AC
distribution system with no direct connection to
earth, according to IEC 60950).
xxxx*
This marking is valid for EU
non-harmonized Telecom
products.
*Notified body number
(used only if applicable -
refer to the product label)
This equipment meets the applicable Industry
Canada Terminal Equipment Technical
Specifications. This is confirmed by the
registration number. The abbreviation, IC, before
the registration number signifies that registration
was performed based on a Declaration of
Conformity indicating that Industry Canada
technical specifications were met. It does not
imply that Industry Canada approved the
equipment.
AC Power Safety Warning
WARNING: Install the HP
MediaSmart Server near an AC
outlet. The AC power cord is the
HP MediaSmart Server's main
AC disconnecting device and
must be easily accessible at all
times. For your safety, the
power cord provided with your
HP MediaSmart Server has a
grounded plug. Always use the
power cord with a properly
grounded wall outlet, to avoid
the risk of electrical shock.
WARNING: Do not operate the
HP MediaSmart Server with the
cover removed.
9