Resetting The Microprocessor; Resetting Memories (Only); Menu Resetting; Full Reset - Yaesu FTDX9000D - DATA MANAGEMENT Operation Manual

8. Resetting the Microprocessor

Resetting Memories (Only)

Use this procedure to reset (clear out) the Memory channels previously stored, without affecting any configuration changes
you may have made to the Menu settings.
1. Press the front panel's [ POWER ] switch to turn the
transceiver off.
2. Press and hold in the [ A
in, press and hold in the front panel's [ POWER ] switch
to turn the transceiver on. Once the transceiver comes
on, you may release the [ A

Menu Resetting

Use this procedure to restore the Menu settings to their factory defaults, without affecting the memories you have pro-
grammed.
1. Press the front panel's [ POWER ] switch to turn the
transceiver off.
2. Press and hold in the [ MNU ] (Menu) key; while hold-
ing it in, press and hold in the front panel's [ POWER ]
switch to turn the transceiver on. Once the transceiver
comes on, you may release the [ MNU ] (Menu) key.

Full Reset

Use this procedure to restore all Menu and Memory settings to their original factory defaults. All Memories will be cleared
out by this procedure.
1. Press the front panel's [ POWER ] switch to turn the
transceiver off.
2. Press and hold in the [ FAST ] and [ LOCK ] switches;
while holding them in, press and hold in the front
panel's [ POWER ] switch to turn the transceiver on.
Once the transceiver comes on, you may release the
other two switches.
FT 9000D O
DX PERATION
B Y
EFORE OU
M ] switch; while holding it
M ] switch.
M
ANUAL
B . . .
EGIN
[ POWER ] switch
[ POWER ] switch
[ POWER ] switch
[ A M ] switch
[ MNU ] key
[ FAST ] switch
&
[ LOCK ] switch
Page 7