Memory Tune Operation - Yaesu FTDX9000D - DATA MANAGEMENT Operation Manual

M O
EMORY PERATION
You may freely tune off of any memory channel in a "Memory tune" mode that is similar to VFO operation. So long as you
do not over-write the contents of the current memory, Memory tune operation will not alter the contents of the memory
channel.
1. Press the [ V/M ] switch to recall any memory channel.
2. Rotate the [ Main Tuning Dial ] knob; you will now
observe that the memory channel's frequency is chang-
ing.
A A A A A
D D D D D VICE VICE VICE VICE VICE
" " will replace "
dow, indicating you are in the "Memory Tune"
mode.
During Memory Tune operation, you may change
operating modes, and engage and offset the Clari-
fier, if desired.
3. Press the [ V/M ] switch momentarily to return to the
originally-memorized frequency of the current memory
channel. One more press of the [ V/M ] key will return
you to VFO operation.
Page 130
M T
EMORY UNE
[ Main Tuning Dial ] knob
" in the multi-panel win-
O
PERATION
[ V/M ] key
N N N N N
Computer software programs utilizing the CAT sys-
tem interface port may presume that the transceiver
is operating in the VFO mode for certain features
like "band mapping" and/or frequency logging. Be-
cause the "Memory Tune" mode so closely re-
sembles the VFO mode, be sure that you have the
FT 9000D operating in a control mode com-
DX
patible with your software's requirements. Use the
VFO mode if you're not sure.
FT 9000D O
DX
O O O O O TE TE TE TE TE
M
PERATION ANUAL