My Bands" Operation - Yaesu FTDX9000D - DATA MANAGEMENT Operation Manual

Hide thumbs Also See for FTDX9000D - DATA MANAGEMENT:
Table of Contents

Advertisement

C
F
ONVENIENT
EATURES
When operating on an Amateur Band on the Main (VFO-A) register, it is possible to use the [ BAND/MHz ] switch to
engage the use of the [ CLAR/VFO-B ] knob for Amateur band selection. The "My Bands" feature allows you to select
several Amateur bands, and make only those bands available for selection via the [ CLAR/VFO-B ] tuning knob.
This feature can be very useful in a contest, where the 10/18/24 MHz band are not used, or if you do not have antennas for
some bands.
"My Bands" Setup
1. Press the [ MNU ] key to engage the Menu mode; the
Menu list will appear on the TFT.
2. Rotate the [ Main Tuning Dial ] Tuning Dial to se-
lect Menu item "TUNING 144 MY BAND".
3. Rotate the [ CLAR/VFO-B ] knob to choose a band
that you wish to skip (omit) from the band-selection
loop (when using the [ CLAR/VFO-B ] knob for band
selection). The available choices are 1.8/3.5/7/10/14/
18/21/24/28/50/GEN/TRV, and the factory-default
selection is TRV (only).
4. Press the [ ENT ] key to set the omission command to
ON.
5. Repeat steps 3 and 4 to select/deselect as many bands
as you like.
N N N N N
O O O O O TE
TE
TE
TE
TE
The "ON" command sets the selected band to be
skipped, while the "OFF" command sets the selected
band to be included in the band-selection list.
6. Press and hold in the [ MNU ] key for two seconds to
lock in the new configuration and exit to normal op-
eration.
Page 54
"M
B
" O
Y
ANDS
PERATION
[ MAIN Tuning Dial ] knob

"My Bands" Operation

1. Press the [ BAND/MHz ] switch; the imbedded LED
will glow Red.
2. Rotate the [ CLAR/VFO-B ] knob to choose the Ama-
teur band on which you wish to operate. Only those
Amateur bands that have not been skipped will ap-
pear as you scroll through the bands.
1.8MHz
3.5
MHz
7
MHz
10
MHz
14
MHz
18
MHz
21
MHz
24
MHz
28
MHz
50
MHz
TRV
GEN
[ MNU ] key
[ BAND/MHz ] switch
[ CLAR/VFO-B ] knob
14MHz
7MHz
3.5
MHz
3.5MHz
7
MHz
14
MHz
21
MHz
28
MHz
FT
9000D O
DX
PERATION
[ ENT ] key
21MHz
28MHz
M
ANUAL

Advertisement

Table of Contents
loading

Table of Contents