Vfo Tracking Feature - Yaesu FTDX9000D - DATA MANAGEMENT Operation Manual

VFO Tracking Feature

In the default setting, the Main (VFO-A) frequency
and Sub (VFO-B) frequency are changed individu-
ally using the [ Main Tuning Dial ] knob and the
[ SUB VFO-B ] knob.
If you want to tune the Main (VFO-A) frequency
and Sub (VFO-B) frequency together, the VFO
Tracking feature is very useful.
Here is the procedure for activating the VFO Track-
ing feature:
1. Press the [ MNU ] switch to enter the Menu
mode.
2. Rotate the [ Main Tuning Dial ] knob to select
Menu item "GENERAL 040 TRACKING."
3. Rotate the [ CLAR/VFO-B ] knob to select the
desired Tracking mode.
OFF: Disables the VFO Tracking feature.
BAND: When you change bands on the Main
(VFO-A) side, the Sub (VFO-B) fre-
quency will automatically change to be
the same as that of VFO-A.
FREQ: This function is the almost same as
"BAND," however, furthermore, the
Sub (VFO-B) frequency changes to-
gether with the Main (VFO-A) fre-
quency when turning the [ Main Tun-
ing Dial ] knob.
4. Press and hold in the [ MNU ] switch for two
seconds to lock in the new configuration and
exit to normal operation.
FT 9000D O
DX PERATION
S -F
PLIT REQUENCY
M
ANUAL
O
PERATION
Page 103