Display Indicators And Icons - Yaesu FT-847 Operating Manual

Display Indicators and Icons

Operational Command Icons:
: Transmitter is active.
: Receiver Squelch is open.
: "Fast" tuning is active.
: Frequency or switch L
Receiver S-Meter Scale
Reflected Power Meter Scale
when the ATAS-100 is activated.
Satellite Mode
OFF
Default Setting:
PO (Power Output)
TX Alternate Setting:
ALC (via Menu # 24)
F
Page 86
FM Mode: DISC
RX (Discriminator Center
Meter)
26
feature is engaged.
OCK
ON
Default Setting:
PO (Power Output)
Alternate Setting:
ALC
DICS (RX Discriminator
Center Meter)
(via Menu # 33)
F
Page 88
Accessory Feature Icons:
: RF Speech Processor is engaged.
: CW Electronic Keyer is engaged.
: M is engaged.
ONITOR
: Receiver Input A
: Receive Preamplifier is in line.
: Fast AGC is engaged.
: IF Noise Blanker is engaged.
Main Band Operating Icons:
: Memory Tune mode is active.
: S S
MART EARCH
: Repeater Shift indicators.
: CTCSS Encoder is active.
: CTCSS Decoder is active.
: Digital Code Squelch Encoder/Decoder is active.
: Receiver "C
LARIFIER
Main Band Operating Mode Icons:
: Lower Sideband
: Upper Sideband
: CW
: AM
: FM
: Narrow Filter is engaged.
: FM Packet Baud Rate: 9600 bps
: FM Packet or SSB D
is engaged.
TTENUATOR
FT-847 O
™ mode is active.
" is active.
Main Band Frequency
Display Field
Transmission is active.
ATA
M
PERATING ANUAL