Memory Operation; Qmb (Quick Memory Bank) - Yaesu FT-847 Operating Manual

Hf + v-uhf all mode transceiver
Hide thumbs Also See for FT-847:
Table of Contents

Advertisement

MEMORY OPERATION

The FT-847's Memory System provides a wide variety of facilities which enhance operating efficiency and conve-
nience. The Memory System stores frequency, operating mode, bandwidth, repeater offset and tone data, and
C
information, to minimize the need to reset controls each time a memory channel is recalled. The features
LARIFIER
of the Memory System are described on the pages to follow.
A convenient QMB channel is available, providing instantaneous storage and recall of an urgently-needed fre-
quency (for example, a DX station which is not currently listening for your call area).
QMB M
EMORY
While operating in the VFO mode, press the [QMB
STO] key momentarily to store the frequency.
Note:The QMB system is capable of memorizing:
l Operating frequency
l Operating mode
l Receiver filter (Wide/Narrow)
l Clarifier information (direction and magni-
tude)
l Repeater shift information (direction and
magnitude)
l Packet baud rate
Press the [QMB RCL] key momentarily to recall
the current QMB channel. The "S P " ("SPecial
Memory") designator will appear in the Memory
Channel window.
ƒ
Press the [QMB RCL] key once more to return to
the previous frequency (either a VFO frequency or
a Memory channel).
70
QMB ( Q
S
/R
TORAGE
ECALL
M
B
UICK
EMORY
Note: If you move the MAIN VFO Tuning Dial or the
VFO/MEM CH knob while in the QMB
Memory mode, you can change frequencies as
if you were in a "VFO" mode. When this is done,
the "MT " (Memory Tune) icon will appear on
the display. Press the [QMB RCL] key once
more to return to the originally-stored QMB fre-
quency.
)
ANK
FT-847 O
PERATING
M
ANUAL

Advertisement

Table of Contents
loading

Table of Contents