Smart Search - Yaesu FT-847 Operating Manual

Hf + v-uhf all mode transceiver
Hide thumbs Also See for FT-847:
Table of Contents

Advertisement

Smart Search™

The S
S
MART
EARCH
for you to go through the memory loading process manually, channel-by-channel. This may be particularly useful
when traveling to a new city, where local repeater frequencies are not known.
The S
S
MART
EARCH
Set the operating mode to FM.
Adjust the SQL (Squelch) control so that the back-
ground noise is just silenced.
ƒ
Press the [S.SRCH] key momentarily to enter the
S
S
™ mode. The "S.SRCH " icon will
MART
EARCH
appear on the LCD.
Press the [S.SRCH] key for ½ second to initiate
S
S
™ scanning.
MART
EARCH
...
The S
S
MART
EARCH
FT-847 to scan upward in frequency on the current
band, loading channels on which it encounters a
signal strong enough to open the squelch. When
10 channels are loaded, the scanner will return to
the original frequency, then scan downward in fre-
quency, loading another 10 channels. When all 20
S
S
MART
EARCH
will stop, and the transceiver will return to the origi-
nal operating frequency.
To interrupt S
MART
press the [S.SRCH] key momentarily.
76
™ feature automatically loads active channels into special memory locations, without the need
™ feature is functional in the FM mode only.
™ process will now cause the
™ channels are loaded, scanning
S
™ scanning at any time,
EARCH
To recall S
S
MART
EARCH
rotate the MEM/VFO CH knob (you must be in
the S
S
™ mode, with the "S.SRCH "
MART
EARCH
icon displayed, to recall S
ries).
ˆ
To enter the S
MART
the VFO or Memory mode, or to exit the S
S
™ mode, press the [S.SRCH] key momen-
EARCH
tarily.
Note: S
S
™ memories for frequencies
MART
EARCH
above the original operating frequency are num-
bered "1 " ~ "10 " in the memory channel dis-
play area. S
MART
quencies below the original operating frequency
are numbered "– 1 " ~ "– 1 0 " in the memory
channel display area.
During the S
MART
the scanner only "notes" which channels are ac-
tive; scanning does not stop until the S
S
™ channels are filled (unless you manu-
EARCH
ally stop the scan, as in step
FT-847 O
™ memories just stored,
S
™ memo-
MART
EARCH
S
™ mode from either
EARCH
MART
S
™ memories for fre-
EARCH
S
™ scanning process,
EARCH
MART
...
above).
M
PERATING
ANUAL

Advertisement

Table of Contents
loading

Table of Contents