Yaesu FT DX 9000 CONTEST Operation Manual page 146

M M M M M M M M M M
ENU ENU ENU ODE ODE ODE
ENU ENU ODE ODE
RX DSP G
111. SUB-RTTY-SHAPE
Function: Selects the passband characteristics of
the sub band (VFO-B) DSP filter for the RTTY mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of
the filter factor.
A
: If the Dual Receiver Unit (RXU-9000) is not
DVICE
installed, changing this setting will have no effect.
112. SUB-RTTY-SLOPE
Function: Selects the shape factor of the sub band
(VFO-B) DSP filter for the RTTY mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
A
: If the Dual Receiver Unit (RXU-9000) is not
DVICE
installed, changing this setting will have no effect.
113. SUB-RTTY-NARROW
Function: Selects the passband of the sub band
(VFO-B) DSP filter for the RTTY "narrow" mode.
Available Values: 25/50/100/200/300/400 Hz
Default Setting: 300 Hz
A
: If the Dual Receiver Unit (RXU-9000) is not
DVICE
installed, changing this setting will have no effect.
114. SUB-SSB-SHAPE
Function: Selects the passband characteristics of
the sub band (VFO-B) DSP filter for the SSB mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
A
: If the Dual Receiver Unit (RXU-9000) is not
DVICE
installed, changing this setting will have no effect.
115. SUB-SSB-SLOPE
Function: Selects the shape factor of the sub band
(VFO-B) DSP filter for the SSB mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
A
: If the Dual Receiver Unit (RXU-9000) is not
DVICE
installed, changing this setting will have no effect.
116. SUB-SSB-NARROW
Function: Selects the passband of the main band
(VFO-A) DSP filter for the "narrow" SSB mode.
Available Values: 200/400/600/850/1100/1350/
1500/1650/1800/1950/2100/2250 Hz
Default Setting: 1800 Hz
A
: If the Dual Receiver Unit (RXU-9000) is not
DVICE
installed, changing this setting will have no effect.
Page 144
ROUP
SCOPE G
117. MAIN FIX 1.8 MHz
Function: Selects the scan start frequency of the
FIX mode Spectrum Scope while monitoring on the
main band (VFO-A) 160 m amateur band, when the
optional Data Management Unit (DMU-9000) and
TFT Display Unit (TFT-9000) are installed.
Available Values: 1800 - 1999 kHz (1 kHz steps)
Default Setting: 1800 kHz
118. MAIN FIX 3.5 MHz
Function: Selects the scan start frequency of the
FIX mode Spectrum Scope while monitoring on the
80 m amateur band, when the optional Data Man-
agement Unit (DMU-9000) and TFT Display Unit
(TFT-9000) are installed.
Available Values: 3500 - 3999 kHz (1 kHz steps)
Default Setting: 3500 kHz
119. MAIN FIX 5.0 MHz
Function: Selects the scan start frequency of the
FIX mode Spectrum Scope while monitoring on the
60 m amateur band, when the optional Data Man-
agement Unit (DMU-9000) and TFT Display Unit
(TFT-9000) are installed.
Available Values: 5250 - 5499 kHz (1 kHz steps)
Default Setting: 5250 kHz
120. MAIN FIX 7.0 MHz
Function: Selects the scan start frequency of the
FIX mode Spectrum Scope while monitoring on the
40 m amateur band, when the optional Data Man-
agement Unit (DMU-9000) and TFT Display Unit
(TFT-9000) are installed.
Available Values: 7000 - 7299 kHz (1 kHz steps)
Default Setting: 7000 kHz
121. MAIN FIX 10 MHz
Function: Selects the scan start frequency of the
FIX mode Spectrum Scope while monitoring on the
30 m amateur band, when the optional Data Man-
agement Unit (DMU-9000) and TFT Display Unit
(TFT-9000) are installed.
Available Values: 10100 - 10149 kHz (1 kHz steps)
Default Setting: 10100 kHz
122. MAIN FIX 14 MHz
Function: Selects the scan start frequency of the
FIX mode Spectrum Scope while monitoring on the
20 m amateur band, when the optional Data Man-
agement Unit (DMU-9000) and TFT Display Unit
(TFT-9000) are installed.
Available Values: 14000 - 14349 kHz (1 kHz steps)
Default Setting: 14000 kHz
FT 9000 C
DX ONTEST
ROUP
O M
PERATION ANUAL