Mode Switch; Clarifier Operation; Audio Playback Feature - Yaesu PCC-2000 Reference Book

PCC-2000 R
Click the left mouse button on the [ MODE ] button to select
the desired operating mode for the Main band (VFO-A).
Click the left mouse button on the [ B ] button, then click the
left mouse button on the [ MODE ] button to select the desired
operating mode for the Sub band (VFO-B).
Note:
Click the [ B ] button repeatedly to toggle the operating mode
between the "CW-U" and "CW-L" selections (CW with Up-
per Sideband or Lower Sideband BFO injection).
Click the [ AM/FM ] button to toggle the operating mode be-
tween "AM" (inside of the button glows red) and "FM" (in-
side of the button glows orange).
Click the [ RTTY ] button to toggle the operating mode be-
tween "RTTY-U" and "RTTY-L."
Click the [ PKT ] button to toggle the operating mode between
"PKT-U," "PKT-L," and "PKT-FM."
RX CLAR S
WITCH
Click the left mouse button on the [ RX CLAR ] button to turn the
RX Clarifier on and off.
TX CLAR S
WITCH
Click the left mouse button on the [ TX CLAR ] button to turn the
TX Clarifier on and off.
CLEAR S
WITCH
Click the left mouse button on the [ CLEAR ] button to clear the
Clarifier offset frequency (thereby setting the offset to "Zero").
CLAR K
NOB
Click the left mouse button on the [ CLAR ] knob, then turn
the mouse scroll to tune the Clarifier offset frequency.
Press and hold in the left mouse button on the edge of the
[ CLAR ] knob, then rotate the mouse to tune the Clarifier off-
set frequency while holding in the left mouse button.
R
ECORDING
1. Click the left mouse button on the "Playback" parameter in
the "Option" menu on the "PCC-2000" Personal Computer
Controller to open the "Playback" pop-up window.
2. Click the left mouse button on the [ REC ] button of the Audio
Playback feature to initiate recording.
3. Click the left mouse button on the [ STOP ] button of the Au-
dio Playback feature to stop recording.
P
LAYBACK
1. Click the left mouse button on the "Playback" parameter in
the "Option" menu on the "PCC-2000" Personal Computer
Controller to open the "Playback" pop-up window.
2. Click the left mouse button on the [ PLAY ] button of the Audio
Playback feature to begin playback of the recorded audio.
3. Click the left mouse button on the [ STOP ] button of the Au-
dio Playback feature to stop the playback.
EFERENCE
MODE S
WITCH
C O
LARIFIER PERATION
A P
UDIO LAYBACK
- 7 -
B
OOK
MODE key's
[ RX CLAR ] button
[ TX CLAR ] button
[ CLEAR ] button
F
EATURE
"Playback" window
[ B ] button
[ CLAR ] knob
"Playback" parameter
[ STOP ] button
[ REC ] button
[ PLAY ] button
[ STOP ] button