Simrad ER60 - REV B Operator's Manual page 25

850-164692 / Rev.B
3 Switch off the power on the General Purpose Transceiver
(GPT) and other peripherals (if any).
When the ER60 software has closed down, you need to close
down the computer as well.
1 Click on the Start button in the lower left corner of the
display.
2 Exit the operating system in the normal matter.
3 When notified, switch off the power.
Related topics
→
Toolbar, page 5
→
Normal Operation, page 102
→
Transceiver Installation, page 123
Operational procedures
17