Simrad ER60 - REV B Operator's Manual page 121

Dialogue boxes and functions
Remoting: Server
The echo sounder program can function as a data server for
other programs running on other computers connected to the
LAN. In this case data are transferred as UDP packets from/to
the server through an Ethernet card with a specific IP address.
The server page is only used if you want to use the echo sounder
program as a server for other client programs.
Browse request handling
If you have two network cards you can use one network card for
transceiver communication and the other network card for
transferring data between server and clients. Specify network
card for server functionality by selecting the appropriate IP
address from the list. The initial connection between a server
and a client is created through on a specific UDP port number
on the server. When the connection is established data
communication is transferred to a new UDP port number which
is automatically assigned by the server. The default local port
number for the initial connection can be changed if you want to
use a specific local port number, normally this is not necessary.
Application information
When the service application exposes itself it exposes various
application information. The description and ID exposed can be
set here.
113
850-164692 / Rev.B