Simrad ER60 - REV B Operator's Manual page 161

850-164692 / Rev.B
An example of the contents of the Response field of a
ChangeSubscription command to the RemoteDataServer is
shown below.
<response>
<clientInfo>
<cid dt="3">1</cid>
<rid dt="3">1</rid>
</clientInfo>
<fault>
<detail>
<errorcode dt="3">0</errorcode>
</detail>
</fault>
<ChangeSubscriptionResponse>
</ChangeSusbcriptionResponse>
</response>
Destroy data subscriptions
The method part of the request shall be set to Unsubscribe. The
Unsubscribe method has the following parameters.
Parameter name
subscriptionID
An example of the contents of the szRequest field of an
Unsubscribe command to the RemoteDataServer is shown
below.
<request>
<clientInfo>
<cid>1</cid>
<rid>1</rid>
</clientInfo>
<type>invokeMethod</type>
<targetComponent>RemoteDataServer
</targetComponent>
<method>
<Unsubscribe>
<subscriptionID>1</subscriptionID>
</Unsubscribe>
</method>
</request>
The server application will respond with a ResponseDef
message. The Unsubscribe method does not have any output
parameters.
Data interfaces
Description
The identification of the subscription
that shall be closed.
153