Simrad ER60 - REV B Operator's Manual page 165

850-164692 / Rev.B
<targetComponent>
ParameterServer
</targetComponent>
<method>
<SetParameter>
<paramName>
RemoteCommandDispatcher/ClientTimeoutLimit
</paramName>
<paramValue>60</paramValue>
<paramType>3</paramType>
</SetParameter>
</method>
</request>
The server application will respond with a Response message.
The SetParameter method does not have any output
parameters.
An example of the contents of the Response field of a
SetParameter command to the ParameterServer is shown
below.
<response>
<clientInfo>
<cid dt="3">1</cid>
<rid dt="3">28</rid>
</clientInfo>
<fault>
<detail>
<errorcode dt="3">0</errorcode>
</detail>
</fault>
</response>
Data interfaces
157