Placing Originals In The Adf Or Ardf - Ricoh 2020D - Aficio B/W Laser Copy Reference Manual

Placing Originals in the ADF or
ARDF
Settings should be made in the fol-
lowing situations:
❖ ❖ ❖ ❖ When placing custom size originals:
p.20 "Placing custom size origi-
nals"
Note
❒ Do not stack originals over the lim-
it mark on the side fence of the
ADF or ARDF.
❒ The last page should be on the bot-
tom.
❒ Do not cover the sensors with your
hands, or place objects on them.
Doing so could cause the size to be
detected incorrectly, or the paper
misfeed error message to appear.
Also, do not place anything on the
cover, as this too could cause a
malfunction.
❖ ❖ ❖ ❖ ARDF
❖ ❖ ❖ ❖ ADF
1.
Sensor
A A A A
Set the document guide to the
original size.
B B B B
Align the edges of the originals
and place them in the ADF or
ARDF with the side to be copied
facing up.
1.
Limit mark
2.
Document guide
Note
❒ Straighten curls in the originals
before placing them in the ADF
or ARDF.
❒ To prevent multiple sheets feed-
ing in at once, fan the originals
before placing them in the ADF,
or ARDF.
❒ Set the original squarely.
Placing Originals
1
AAI036S
AAI026S
19