Installing Using Plug And Play On Windows Vista - Konica Minolta bizhub 181 User Manual

2
2
Select "Include this location in the search:" and then specify the follow-
ing folder on the CD-ROM as the location where the driver is saved.
– Folder to be specified: \Driver\WIN2K_XP\English
– With 64-bit operating systems, select "Driver\WinXP64\English".
– The folder can be selected after clicking the [Browse] button.
3
Click the [Next] button.
– When the Windows logo testing warning message appears, click
the [Continue Anyway] button.
The Completing Found New Hardware Wizard dialog box appears.
4
Click the [Finish] button.
This completes the installation of the TWAIN driver.
The Found New Hardware Wizard appears again, and the installation
of the printer driver begins.
5
Repeat steps 1 through 4 to install the printer driver.

Installing using Plug and Play on Windows Vista

Note
If the driver is installed using Plug and Play, first the TWAIN driver for
scanning is installed, and then installation of the printer driver begins. The
procedure described in this manual is for the installation of the TWAIN
driver, then the printer driver. For details on the TWAIN driver, refer to the
User's Guide for the TWAIN driver.
Follow the instructions that appear in the Found New Hardware wizard to
complete the installation.
2-8
Installing the printer driver
GDI Printer Controller