Installing Using The Add Printer Wizard On Windows Vista - Konica Minolta bizhub 181 User Manual

Installing the printer driver
12
Continue selecting the appropriate settings according to your environ-
ment and clicking the [Next] button until the [Finish] button appears.
– For a network connection, perform a test print after specifying the
network settings.
13
Click the [Finish] button.
– If the Windows logo testing warning message appears, click the
[Continue Anyway] button.
14
After installation is complete, check that the icon for the installed print-
er appears in the Printers and Faxes window, and then remove the CD-
ROM from the CD-ROM drive.
This completes the installation of the printer driver.

Installing using the Add Printer wizard on Windows Vista

Note
When using a USB cable to connect this machine to the computer, turn
off this machine, and then install the printer driver. When the machine is
turned on, Plug and Play causes the Found New Hardware wizard to ap-
pear.
1
After Windows has started, insert the printer driver CD-ROM into the
CD-ROM/DVD drive of the computer.
2
Click the [Start] button, and then click "Control Panel".
3
Click "Hardware and Sound", then "Printer".
– If Control Panel is displayed in the classic view, double-click "Print-
ers".
The Printers window appears.
GDI Printer Controller
2
2-17