Reinstalling The Printer Driver By Using The Add Printer Wizard - Konica Minolta bizhub 181 User Manual

2
11
Select "LPT1:" as the port to be used, and then click the [Next] button.
– In order to print on a network, the connection port must be set up
as a network port. Since the port settings can be specified after in-
stallation, this procedure describes how to install the printer driver
for a local connection. For details on specifying the port settings,
refer to the User's Guide for the network interface card.
12
Click the [Finish] button.
13
After installation is complete, check that the icon for the installed print-
er appears in the Printers window, and then remove the CD-ROM from
the CD-ROM drive.
This completes the installation of the printer driver.

Reinstalling the printer driver by using the Add Printer Wizard

1
Uninstall the printer driver while the machine is not connected to the
computer or while they are connected but the machine is turned off,
and then restart the computer.
– For details, refer to "Uninstalling the printer driver" on page 2-27.
2
Use the Add Printer Wizard to reinstall the printer driver.
2-26
Installing the printer driver
GDI Printer Controller