DigiTech JAMMAN STEREO Owner's Manual page 21

Connect a second instrument or second output from a previous
pedal for stereo operation. Left and Right inputs are processed
separately through the looper and then fed to the Left and Right
outputs to keep true stereo separation between channels.
Headphone Output
4.
This is a stereo headphone output that lets the JamMan
used without having to connect to an amp or mixer. This output uses
the same mix as presented at the 1/4" outputs, meaning if a single
cable is plugged into the Left (Mono) Output, the headphone output
will also be in mono.
5. Aux Input
Plug your portable MP3/CD player in here. When the Aux Input
Minus Center option is selected, any stereo source is summed to
mono when recorded (see page 34).
Rhythm Output Jack
6.
Use this jack to isolate the Rhythm Output from the looped audio.
Plugging into this output will defeat the Rhythm guide track in the
left and right outputs (see page 49).
7. Footswitch Jack
Plug the optional FS3X Footswitch in here. FS3X footswitches select
Undo, Reverse, and Tempo (see page 58).
8. SD/SDHC Card Slot
The JamMan Stereo is compatible with optional SD/SDHC memory
cards up to 32GB in size for expanding the total amount of loop
storage time available. Adding an SD card also increases the number
of available loops from 99 to 198. New cards should be formatted
Guided Tour - Rear Panel
Stereo be
®
17