Advertisement
Quick Links
Advertisement
Related Manuals for DigiTech TURBO FLANGE
Summary of Contents for DigiTech TURBO FLANGE
-
Page 2: Declaration Of Conformity
European Contact: Your local DigiTech Sales and Service Office or not operate normally, or has been dropped. 11.WARNING:To reduce the risk of fire or electric... - Page 3 6.The consumer forfeits the benefits of this warranty if the product's main assembly is opened and tam- pered with by anyone other than a certified DigiTech technician or, if the product is used with AC volt- ages outside of the range suggested by the manufacturer.
- Page 4 The Turbo Flange is a multi-function flanger pedal that offers seven different types of flanging effects and CIT™ cabinet modeling. The following sections outline how the knobs and pedal functions will work. 1. Speed Knob Controls the speed of the flange sweep. Turn this knob clockwise to increase the speed, and counter-clockwise to decrease the speed.
- Page 5 2 3 4...
- Page 6 7. STEP - Creates a random square wave flange effect similar to a sample and hold filter on a synthesizer. * Using a distortion pedal before the Turbo Flange may cause inconsistent triggering due to the non-dynamic nature of distorted...
-
Page 7: Indicator Led
6. Input Jack Connect your instrument to this jack. Connecting a guitar cable to this jack supplies battery power even though the Indicator LED may not be lit. To prolong battery life, disconnect all cables from the pedal when not in use. 7. - Page 8 Turbo Flange pedal. Connections The Turbo Flange has a single input and a pair of outputs. Out 1 is used if the Turbo Flange is being connected to only one amplifier or mixer channel with the pan set to center. Out 2 is used for stereo operation. Connect Out 1 to the first amplifier or mixer channel panned left and Out 2 to the second amplifier or mixer channel panned right.
-
Page 10: Battery Replacement
Battery Replacement 1. Using the tip of a 1/4” guitar cable, push one of the release pins in on either side of the pedal, and remove the pedal from the pedal chassis. 2. Remove the battery from the battery compartment and disconnect the battery cable. - Page 11 Pedal Pedal Switch 9V DC Battery Pedal Release Battery Compartment Pedal Release Spring Pedal Chassis...
-
Page 12: Specifications
PH (801) 566-8800 • Input Impedance - 1 MOhms FAX (801) 566-7005 • Output Impedance - 100 Ohms DigiTech and X-Series are trademarks • Power Supply - 9V Alkaline Dry Battery of the Harman Music Group Inc. • Power Consumption - 4.8Watts...