Storing/Copying Phrases; Store Changes To A Loop; Copy A Loop To A Different Memory Location - DigiTech JAMMAN Owner's Manual

Storing/Copying Phrases

Anytime a change is made to a loop memory location (Rhythm Type, Tempo,
Time Signature, Record, Overdubs etc.) the
light. This indicates that the changes will be lost unless a store procedure is
performed before selecting a new loop memory location, turning off the power.

Store Changes to a Loop

1. Stop any recording activity using the
2. Press the
will begin to flash (the
location).
3. (Optional) Use the
location to store the loop with its changes (the
are off), or press
4. Press the
the
LooP StoRe

Copy a Loop to a Different Memory Location

1. Stop any playback or record activity using the
2. Use the
loop (either the
3. Press the
will begin to flash.
4. Use the
(the
LooP
5. Press the
new memory location.
Note: The Clear and Overdub Undo/Redo functions cannot be performed
to the loop after a Store/Copy procedure.
46
button. The
LooP StoRe
DISPLaY
SeLect
to abort.
SetUP
button again. The changes are now saved and
LooP StoRe
button turns off.
buttons to select a memory location that contains a
SeLect
or
LooP
button. The
LooP StoRe
buttons until an empty memory location is selected
SeLect
and LEDs are off), or press
SINgLe
button again. The loop is now copied to the
LooP StoRe
LooP StoRe
teMPo/StoP
LooP StoRe
shows the current loop memory
buttons to select an empty loop memory
LED is lit).
SINgLe
DISPLaY
button will immediately
footswitch.
button and the
or
LooP SINgLe
footswitch.
teMPo/StoP
and the
LooP StoRe
to abort.
SetUP
DISPLaY
LEDs
button